Table of Contents

Pressure washers at home are a great tool for

Cleaning large surfaces like a deck, driveway or even the exterior of a home would require a lot of time to complete with a hand. A portable pressure washer with water tank are one of the tools that combine the power of natural cleaning of water with the power of high pressure to provide an efficient wash in a fraction of the time.

As with all tools, in order to get the most out the pressure washer, you need to learn the way it works. Here is a manual that can help you understand the basics of working with a pressure washer.

What is the process of a pressure washer

How a pressure washer gets its pressure

The pressure washer utilizes the water from a normal garden hose. The hose is connected to the machine. A high-speed pump inside it raises water pressure until it can be used as a highly abrasive stream. The strength of the spray is controlled by an nozzle.

What are the various pressure washer nozzles?

The nozzles are what will provide the best cleaning power. There are five common sprayers which are distinguished by the degree of focused the spray is.

The red nozzle makes the appearance of a powerful, thin jet of water that’s best for the most challenging staining.

This nozzle, which is yellow in color, comes one lower in strength and is ideal to get rid of mildew and paint.

The green nozzle is a general purpose cleaning nozzle.

The white nozzle comes with the largest spray, making it ideal for cleaning and washing.

It is the sole nozzle that can be used with soap. You can also purchase a turbo spray nozzle, a multi-purpose nozzle or a accessory for cleaning surfaces that is perfect for cleaning decks, patios and more.

Steps for using the pressure washer with water tank

The best instructions to use your pressure washer should be included with your purchase, this general overview can give you a good overview of the procedure.

  1. Clear the area you’ll soon be cleaning to ensure that all delicate items have been taken away. Remove dirt and other debris and cover everything that isn’t movable with the use of a the tarp.
  2. Be sure to look around the area, so that you are aware of outlets, windows and vents.
  3. Select and connect the right nozzle for the job.
  4. Attach your garden hose and pressure washer and make sure to give the machine a good whirl to ensure that everything is securely fastened and the machine is safe for use.
  5. Wear a pair of safety goggles to stop debris from splashing back into your eyes.
  6. Turn on the water supply at the outdoor spigot.
  7. Press the trigger on the wand to let out any air pressure that might be trapped in the line.
  8. Follow your particular machine’s instructions to start your machine.
  9. Before using to spray, check the strength of the spray within a protected location and adjust as required.
  10. Now is the time to begin cleaning.
  11. After shutting off the pressure washer and turning off the water supply, ensure you press the trigger hard enough to let any water pressure to drain before disconnecting the hose and any other components.

Tips for Pressure Washing

  • Pressure washers require a lot of water. Make sure you have enough drainage in the area you’re working otherwise things can quickly become messy.
  • The most crucial aspect to cleaning safely is using the right nozzle for the job. Choose wisely, as the wrong nozzle could damage wood and siding.
  • Avoid spraying paint on windows, painted surfaces, outdoor fixtures and electrical lines.
  • The closer you are to the surface, the more intensely the pressure washer will clean. Always begin cleaning from some distance, perhaps a few feet away. If you require more power you can gradually bring your sprayer towards the area you’re cleaning.
  • Never use a pressure washer when you’re on an elevated ladder.
  • When cleaning vertically, move from top to bottom in a side-toside pattern.
  • Small areas of work with clearly defined objectives.
  • If you are tired, stop for a moment.